Dimensional Measurement

Dimensional Measurement

A complete range of measuring solutions for the dimensional measurement of the full range of rings varying in diameter up to 6000 mm.

The ever-rising quality standards for SEAMLESS RINGS serving high demanding markets, specifically oil and gas and power generation, require increased knowledge in every phase of process control and in every detail of finished product quality checks, with special attention to be given to dimensional checks. This task is essential for major international forges and ringmills in order to guarantee and certify the quality of their products to their final customers.

SEAMLESS ROLLED RINGS
Request More Info

RingCheck Measurement Station

Automatic dimensional check of hot rings during production
The system is usually installed right after the finishing press to measure the full profile, the key dimensions and the quality parameters of the rolled piece.
RingCheck enables the user to correct, in real time, the working parameters, directly and automatically identifying the main rolling defects during the production phase. The 3D visualisation software shows out of tolerance dimensions and the localisation of excess and lack of material.

TECHNICAL SPECIFICATIONS Request Brochure
Measured parameters
  • Ring inner and outer diameters
  • Ring heights
Ring quality parameters
  • Ovalization
  • Eccentricity
  • Conicity
Request Brochure

RingCheck Quality Station

Automatic quality check of cold rings
The complete profile, the key dimensions and the quality parameters of the rolled piece, such as shaped rings, flanges and sleeves, are automatically measured.
Identifying any dimensional defects in real time, RingCheck enables the operator to make prompt decisions on ring destination and, at the same time, to give numerical indications for machining/finishing phase.
System range counts both in-line and off-line applications.

TECHNICAL SPECIFICATIONS Request Brochure
Measured parameters
  • Ring inner and outer diameters
  • Ring heights
Ring quality parameters
  • Ovalization
  • Eccentricity
  • Conicity
Request Brochure

Press Room
Steel & Industrial
Member company of Angelo Investments
Follow MERMEC
     
MERMEC
© 2017 MER MEC S.p.A.  –  C.F./P.IVA 05033050963Privacy  -  Cookie  -  Credits  -  Webmail
Angelo Investments
Member company of